PZP in Perth, Western Australia | Vehicle customisation shop

PZP

Locality: Perth, Western Australia

Phone: +61 8 6140 2769

Address: 1/6 Quantum Link 6065 Perth, WA, Australia

Website: http://www.pzp.com.au

Likes: 7365

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Vehicle parts store
• Vehicle customisation shop

25.01.2022 Fresh build snaps from the Twin Cam RB30 short motor built a few weeks ago. This one's shelf stock so if anyone's interested, it's for sale! PM for build details. (Y)

25.01.2022 Good things come in small packages! This Garrett G25-660 came in today for a customers SRVE circuit racer. Looking forward to dyno so we can see the G series response.

24.01.2022 Giving Alexs RB20 powered S13 drifter some Maxing our the stock AFM; still with a nice 98ron AFR. Time for an ECU upgrade and some head studs Alex! Link? Haltech? Emtron? Motec? You decide mate, well supply it!

24.01.2022 Marks super clean 32 GTR got the once over... Out with the PowerFC and in with the Link G4+ (it now starts off the key, runs and idles like it should!), a Taarks twin pump surge tank with 525lph walbros and a host of other little accessories. Putting down a tickle over 500hp on E85 with 1.4 bar. Sweet streeter mate!

24.01.2022 Another GTR back on the streets. Rob's R32 had some engine dramas and wanted to get behind the wheel again. A good condition RB26 was sourced ex East and with a bit of a freshen up, it was in and out in no time. Beats sitting in the back shed with half an inch of dust on em!

24.01.2022 WTAC 2020 Cancelled due to COVID-19.

24.01.2022 Marks R32 GTR back in a few weeks ago for a head stud upgrade and more boost.

24.01.2022 Our friends at Haltech dropped in to have a chat!

24.01.2022 Time to play with the new @link_ecu G4X GTR Plugin

23.01.2022 Check out the draft master plan for Wanneroo Raceways development and expansion over the next 10 years, created by Apex Circuit Design for Dave Lanfear Consultating/City of Wanneroo. "Councillors will consider endorsing the plan for public consultation from March 30 to May 10 at their meeting next Tuesday." More information found in the community news here: https://www.communitynews.com.au//vision-for-wanneroo-rac/

22.01.2022 Another clean example of an S15 with James' one here. In for Kelford drop-in cams, radium fuel rail, radium dmr reg, 950cc injectors, walbro 460 pump and a retune of the PowerFC djetro. Simple, neat streeter with a bit of go.

21.01.2022 Them new turbo feels

19.01.2022 Toms R33 GTR cracking into the 700 club with 733hp/820nm. Kelford Cams, head clearancing, a reshim and tune we picked up another 200odd hp. Its a totally different car to drive now and has turned out quite streetable. With a few more tweaks to the setup hell be at his target 800hp pretty soon.

19.01.2022 VIP styles! We always love seeing Brad's F50 Cima come through the door. This rig is super plush, bagged and a naughty V8 rumble....

18.01.2022 Shaking down Shauns R33 last week at Barbagallo Raceway. Its an animal!

14.01.2022 Deans SR20 powered Datsun 1600 putting down 370hp @ 20lb on 98ron after some PZP love. We fitted and dialed in some 268/272 with 12mm/11.5mm Kelford Cams combined with Kelford pacaloy single springs and their new adjustable gears . Bit of a cam break-in then service and retune. Nice rig Dean!

13.01.2022 Haltechs next gen ECU/PDM in one was released today at PRI. Built to supplement the Elite series ECUs, not replace them. Well have to get our hands on one for a play soon.

12.01.2022 Eds Z34 7AT got some love last week with an Uprev tune and a few maintenance items. Mods included EPS throttle bodies, Z1 ported manifold + intakes and exhaust to name a few.

10.01.2022 Do you even lift bro? #lift #kelfordcustomwizardry #hadtoflycutpistons

09.01.2022 Check out the draft master plan for Wanneroo Raceway’s development and expansion over the next 10 years, created by Apex Circuit Design for Dave Lanfear Consultating/City of Wanneroo. "Councillors will consider endorsing the plan for public consultation from March 30 to May 10 at their meeting next Tuesday." More information found in the community news here: https://www.communitynews.com.au//vision-for-wanneroo-rac/

09.01.2022 Yes, the crankcase does vent back into the intake

08.01.2022 Another order in from our friends at Kelford Cams.

06.01.2022 Making good use of our VQ/VR Torque Plates. Lots of VQ37VHR builds making progress now!

06.01.2022 Another VQ on the dyno. This one another VQ35HR with idle issues after throttle body cleaning. An Uprev assisted idle air volume re-learn then power tuned! Gains of 26rwhp and a rock solid smooth idle... beats Nissans recommenced ECU replacement at over 2.5k

05.01.2022 Casual dirty 30 builds for your Saturday arvo

02.01.2022 Sneak peak port shot #RB #CNCporn #PZP

02.01.2022 Another SR20 build out the door! This donk got a freshen up with our Wiseco/K1 combo, some Kelford sticks and the usual trimmings.

02.01.2022 Unfortunately the video doesnt capture it but over-run flames on this GTR tickle the soul... almost like someone dropped the base. Not condoning but...... tunnel runs?

02.01.2022 Steves Twin GTX2867G2 Turbod 370Z ready for pickup after a sweet new 9:1 CR forged motor build. A healthy 450hp/550nm on 10psi with a 6500rpm limit for the run-in period. Were eager to get it back for some decent boost and timing plus an 8K rev limit. One naughty sleeper Z34!

02.01.2022 It's a long time between updates, lots going on at the shop over the past few months but we're buttoning up Shaun's Racegtst R33 Skyline Sport Sedan. Another dyno session on the hubs as traction is an issue on our rollers and we should be done. Turn up the volume on this one, this little RB loves to rev and we haven't swung it to the target RPM limit yet.