Somoracz Racecars in Camden, New South Wales, Australia | aircraft & boat

Somoracz Racecars

Locality: Camden, New South Wales, Australia

Phone: +61 2 4655 2131

Address: Unit 3 No 30 Argyle Street 2570 Camden, NSW, Australia

Website:

Likes: 651

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Automotive
• aircraft & boat

23.01.2022 chainey just picked his altered up .replaced the chassis at the front and remounted the nose cone and put a tow hook on also remounted the fuel tank and changed the outlet also added a drain bung as it didn't have one.mounted the steering box in a different position to suit the driver better and made new steering rods.replaced a few bent crossmembers in the chassis and added a jacking lug as well .fitted a new race products diff housing and fitted their floaters after shortening the tubes ,nice local product that I would recommend .also welded on a breather bung and chute mounts .also made a new wheelie bar for the car that's is easier to adjust than the old one .

18.01.2022 built a strut front for toms torana a while ago and didn't post any pics . so here they are

17.01.2022 so proud to have been involved in the build of this racecar .so cool to see it run a five

16.01.2022 fitted a new swaybar to the merda nova .picked up last week

16.01.2022 Getting some progress, diff is almost in, great diff thanks to race products, John Somoracz race cars for putting it together , Stephen Micallef, shift right for building the Center, Trevor Stark, Narellan powdercoating, for the mad finish and bluey for helping fit it.

13.01.2022 new rollcage for whiteys grandson as he has grown too big for it . removed the old one and made a new taller and wider one with helmet bars . running this weekend at Sydney dragway

12.01.2022 After over a year ‘break’ we finally took the dragster out to Sydney Dragway yesterday, no expectations, just hoping to get some passes on the car and get the d...river comfortable again. We managed 3 full track passes with two 7.78 passes in the left lane and one 7.83 in the right. Happy Days for the driver and team seeing these numbers! I cannot thank everyone who helped get the dragster back in shape enough! A couple of special mentions firstly to, John Somoracz for the brilliant chassis work on the front half and all the other bits and pieces you fixed up and secondly to my love, Cory Dyson for spending countless hours in the shed piecing this puzzle back together, you are amazing! & of course to my family on and off the track for the constant help and support Dad, Mum, Jess, Neil, Kathy and Warrick. Drag racing is such a team sport & I am lucky to have you guys on mine. Your girl is back See more

08.01.2022 last weeks job was steves cortina .when the guy who owned it before steve I did a strange strut moly tube front end for it .that was 10 years ago .it wasn't raced in this form till steve bought the car last year .anyway it was in for a scaling and 4 link and shock and ride height change .going to the test and tune this Saturday 21st july .so glad to see this car being raced.

06.01.2022 got nathans mighty boy back to set ride height and square up suspension and put on scales . repaired this car several years ago after a meeting with the the wall at Sydney dragway .it got fresh pipe from the firewall forward .Nathan had a one piece fiberglass front clip made longer than standard .increased the wheelbase to suit also mounted struts and rack ,mounted the engine and built a new set of headers.also new firewall and removable interior tin and dash and a new lexan sreen to suit the new clip .as well the doors were made removable so its easier to work on .car looks short cos there is no front or rear overhang . think it will be racing soon .

06.01.2022 last month I did this nine inch housing to suit a huyundai I load van that has an LS conversion . different

04.01.2022 just took fionas dragster off the jig . the front of the chassis was bent from a few sand trap excursions so I replaced the tubing from the footbox forward . also remounted all the body panels as well as fixing the seat . did new battery mount and weight bar tags .as well there is a new dzus mounted dash top and new rack mounts . should get picked up tomorrow for them reassemble

04.01.2022 sent corys dragster home to Victoria last month .the chassis was damaged so I replaced it from the footbox forward with new chrome moly tubing .built new front a-arms and remounted the rack .also remounted all the body panels and nosecone as well as battery and other brackets .the car was a comp car so I changed the design of the front half to make it more durable for grp 3 duties .the boys have been hooking in to get it back together and should be shaking it down soon .

02.01.2022 sent ronnies torana home this week .it crashed here in sydney and i replaced the chassis from the firewall forward and mounted new front and rear motor plates and mounted the rack .its off to the panel beaters to repair the accident damage to the rear quarters and fix a few small rust spots .when that is done it comes back to do the tin work and rearend