Weapsim in Moolap, Victoria, Australia | Local business

Weapsim

Locality: Moolap, Victoria, Australia

Phone: +61 448 888 017

Address: 19 Grandview Parade 3224 Moolap, VIC, Australia

Website: http://weapsim.com.au

Likes: 478

Add/Update information

Reviews

Tags

• Local business

24.01.2022 All the Landy engine components have been cleaned in preparation for the rebuild

22.01.2022 Air filter started as a a rusty old oil bath, stripped down spent the night in the acid drum and now converted to a paper cartridge filter and painted

21.01.2022 Pressure washed diffs, engine and gearbox ready for a full rebuild. Refurbished a few components and modified the new doors

21.01.2022 This is what we are aiming for with our current project. The vehicle has now been fully stripped and the chassis left today for galvanising. This should give us a week to have everything ready to bolt back on the panels will take a little longer as the old ‘new’ paint needs to be removed and most external panels and rear tub will be replaced due to excessive damage. We have now mastered welding the aluminium panels ‘not for the faint hearted’ so this enables us to save some of them. Stay tuned this will be one awesome little shorty!

19.01.2022 Jamie’s box corner

18.01.2022 Chassis work just about done, then off for galvanising

14.01.2022 Welcome to Jamie who has joined the Land Rover team. Straight onto gearbox builds

12.01.2022 The 2.25 Diesel getting a make over

11.01.2022 Good way to finish off a Friday, chassis back from galvanising and ready for re assembly

10.01.2022 The Scout finally on its way to new home, hope the owner is as happy with it as we are

08.01.2022 Few rust repairs to bonnet frame

05.01.2022 Dirty diesel all stripped down, all bearings shot, valves are cactus No4 exhaust the worst which caused a blocked artery with a 20mm hole, had to use hammer and chisel to clear it. Bores looked good I’ll measure when it comes out of the acid bath.

04.01.2022 Final clean and detail prior to delivery, will be sad to see her go

02.01.2022 Drilled out the galvanising from all holes and re tapped all threads prior to a coat of black vinyl etch primer

01.01.2022 Chassis primed and painted ready for assembly