AIMedical | Sports
AIMedical
Phone: 08 8294 8664
Reviews
to load big map
21.01.2022 Biomechanics treadmills made by h/p/cosmos with zebris Medical instrumented deck for pressure & force distribution measurement for humans & animals, such as d...ogs. https://www.h-p-cosmos.com//medicine/rehawalk-gait-analysis #Biomechanics #treadmills #zebris #instrumented #pressure #force #distribution #measurement #humans #animals #dogs #ForcePlate #kinesiology #kinematic #Laufband #Biomechanik #Kraftmessung #Ganganalyse #Tiere #hpcosmos
17.01.2022 Validation of Microgate OptoJump | Biomechanics | Science Update Waterford Institute of Technology (Waterford/Ireland) and ART Health Solutions (Gateshead/Unite...d Kingdom) most recently published a study, validating the data quality of Microgate OptoJump over a range of running speeds from 12 to 16 kmh. The OptoJump bars were placed on top of the side footboards of an h/p/cosmos pulsar treadmill, therefore the effective measurement plane was slightly above the real one, i.e. the treadmill surface. While most parameters, e.g. stride time, stride length and stride frequency showed excellent validity, some parameters became faulty (e.g. contact time) due to the height difference between the position of the bars and the treadmill surface. As a result, the study suggested to incorporate a correction factor, which is already available and can be set in the software, called GaitR-In and GaitR-Out filter. Thanks to the authors of the study for the great work. We would, as an addition, like to highlight two available improvements in this context: 1) The h/p/cosmos Optofix system that magnetically mounts and fixes OptoJump/OptoGait bars to the treadmill in a safe way. 2) The built-in OptoGait systems, available for h/p/cosmos treadmills with a running surface of 170 or 190 cm, that reduce the height difference for the most part and measure as close as possible at the running surface. Review the full paper: https://commons.nmu.edu/isbs/vol38/iss1/163/ A quick introduction to the Optofix system: https://youtu.be/5QdtjsA7OKk?t=105 Information on the GaitR-in and GaitR-Out filter: http://www.optogait.com//The-filter-parameters-GaitR-In-an Authors: Mark J. Flynn [1,2], Richard Bolger [1] , Paul D. Smith [2] and Michael Hanlon [1] [1: Waterford Institute of Technology, Waterford, Ireland] [2: ART Health Solutions, Gateshead, United Kingdom] #optogait #optojump #science #scienceupdate #biomechanics #validation #contacttime #hpcosmos #microgate #isbs #gaitlab #gaitanalysis
12.01.2022 It's been quite the year, filled with unexpected events and hardships, but thanks to all of our customers and followers, we still achieved a great amount of work. We couldn't do it without you. Happy New Year and cheers to 2021!
03.01.2022 https://m.facebook.com/story.php?story_fbid=2902341189995620&id=1919194751643607
